Відео

If I could put her in the right seat of the longitude. I'd be happy. Lol.

Perfeito 👏

Fun fact - none of the prop pitch should be working without the engine running. The pitch is controlled by oil pressure from the engine oil system, and without that feed will sit in the feather position permanently due to the massive spring that sings inside the spinner and the counterweights on the blades themselves. You can move the prop lever or power lever as much as you want - nothing will happen without the engine running. That might be a bit difficult to code though...

We're at

Did you want on the Disney want to buy or Disney wish or or Disney drawing

that stupid ridiculous intro is why you only have 400 subs.

It’s the abandon ship alarm, which is more than 6 short blasts and one long blast of the ships whistle supplemented by the general alarm. They are properly just carrying out a test for the alarm system and drilling abandon ship procedures such as securing your work place, equipping survival gear, I.e. life jackets and etc. mustering at your designated area, and carrying out your station bill. Along with lowering life rafts, life boats and rescue boats to test if they are suitable for use.

Imagine this was on the Disney cruise every body on the cruise ship be screaming

Thank you for the video. Could you please tell me how you get to the passenger view?

Finally. Someone explained NIS in a way I can understand.

Bro emergency is a kill 💀💀💀💀💀

everyone knows that a lot of these gps fishfinders come without maps? the lowrance ones are often shipped with just the base maps with little to no details. Just buy a navionics and pop it it like everyone else, I think you have just seen the downscale model for a little extra and wish you had purchased that. And besides the price is comparable with the lowrance gps fishfinders of this size so don't get the problem???

They need an EC155 too. Thats my favorite

I am unable to get my action pack aircraft to function after the update. What did you do when the update was released?

Why is Disney's the scariest one with the dissonant chord lol ironic

That’s annoying 😊

These look awesome and more realistic, is there a way to have the beacon white instead of red?

It sound like the cat recording

Please review the aircraft’s operating procedures… quite cringy to watch

No stutters on my end:) stop leeching wifi off yer neighbor and youll stream better

Unfortunately you have not enabled Nvidia Image Scaling. The BLUE NIS logo at the top left of the screen means NIS is standing by but it is not fully enabled. It turns GREEN when you have properly enabled it. To enable it you need to go to your Nvidia Control Panel and enable Image Scaling. "85" % in the Geforce Experience panel does not mean you have upscaled anything. 85% in the Geforce Experience settings means you have reduced your monitor's NATIVE full screen resolution down to 85% and the NIS software is boosting it back up to native resolution scaling. But you haven't first enabled it, so all you have done is to reduce your full screen resolution and your monitor has expanded the image so it fills the screen

Is it testing? Or the sound you know to evacuate to your station?

Very helpful and informative :) thanks . What's the airport you are at? It's very nice

Well you totally blew the Embraer review 2 years ago.......... Try it now on Series X after the May 2022 patching for the later SU 9-11 and it's simply amazing. It's now 5 stars and I'm on Beta SU12 and Beta AAU1 on Series X. Incredibly good coding and Asobo did step in and help these devs sort it out. Your review needs addressing sir!

Sometimes when you double click after you extract a mod a bunch of files will open up do you have to do each one individually

how do you learn the use of the fmc? I can't find it in the manual

Love me some good ol'stuttering like this. Hopefully we'll get 10fps out of this with a high end computer.

Happy Halloween to the Disney family

I assume you have to install it manually in the community folder. As a newbe can you tell me how to do this in simple terms please? Thank you.

Thx ur a Legend

😁😁👍👍😮😮Amazing videos and airplane !

Hey can you do a tutorial on this? That’d be awesome

Image scaling crashes my FS2020 to the desktop. It hangs in for 15-30 sek and then crashes. Hate it because it sure boosts the FPS alot!

THANK YOU!!! IT HELPED TO ME SO MUCH!! I AM YOUR 311th SUBSCRIBER!

"Set the RPM mapping?" How? Please explain. I can reverse the King Air's prop using the throttle (Reverse Thrust mapping below the detents), but I haven't successfully feathered the prop. :-( Exellent video! Thank you, sir.

Thanks bro! This worked out! I was just about to freak out and this helped!!

Disney cruise Magic: help me i'm burning! You just have 15 seconds

What happened?

I've owned this fish finder for years. I wouldn't part with it for anything. Best fishfinder you can buy.

This geforce manager is a lot different than mine.Mine doesnt have half of this stuff.

Very nice video. It so interesting to watch, but I have one question: as you shut down the engine, why did you pressed the engine vent? I thought that it only is for letting air threw the engines, so the rotor don’t has to move?

I can’t wait to get my hands on this. Hours of fun! I just made the transition from FSX to 2020 and have only the aircraft that came with the Game of the Year edition which was 45 fixed wing and one rotor driven and that’s a Volocity electric flying car thing. No real helo came with it! I couldn’t believe it. Well. That’s a situation I can remedy. This looks like a good first helicopter. I also been looking at the Bell 47 like you see in the MASH series. A big glass ball on a metal frame with a rotor above. That would also be fun to fly. I will own both, just which one first? Liked and subbed

Awesome as I was going to buy the 890 til I saw your vid Thanks much

Sorry this is not NIS all you did was knock down your resolution and apply a 50% sharpen, for your NIS to actually get enabled you need to run your desktop resolution at the same res as what you are going to scale to, then the NIS will turn blue so the idea is you put your desktop and game res down to each other and try and scale up to something else in this case 85% whatever the native is, this only gave you frames because you lowered your resolution. If you actually scaled you would have seen how terrible it looks especially on a screen as big as yours.

Whats your GPU?

Great stuff! I could never get mine to work, the NIS disappears whenever I use scaling for some reason. Maybe I was doing it wrong, I was setting my in game resolution to match that resolution set in the image scaling in NVidia geforce experience. I will try your way.

Okay, a few things here. You never want to start a turbine with the FCU (Mixture) Control Lever to any other position than CUTOFF and the Thrust Levers to IDLE (not beta, IDLE). A KingAir is easy to start. : - Battery ON - Boost Pumps ON - Props Full Forward (Feather if noise restricted. Will increase ITT). - Right Engine Start HOLD - At >15% Turbine, Right FCU Lever -> Low Idle (Watch for Hot/Hung Start). >50% Turbine, release the Starter (ensure OFF). - Right FCU Lever -> High Idle, Generator 2 ON - Below 40% GEN LOAD on the Right, start Left Engine (same procedure but High Idle not required). - Once Left Engine is started and Left Gen ON, return Right FCU lever to Low Idle. Continue with the flow. You can make the entire flight on LOW IDLE. High Idle will give you more power at Idle reversing and will provide Air Conditionning in High Altitude/Hot Temperatures conditions. Fly safe !

Great demo, seems to work now, but have you tried on ground, together with reverse thrust......?

Wait. You have charlie pedals? I've been waiting for those to drop.

Is that a honeycomb update? I have never been able to bind the feather option.